How To Use A Plumber Plunge

How To Use A Plumber Plunge

You might not be a plumber, but you can still do some plumbing.

Plunger is a staple in every household, and you probably use it on a regular basis to unclog your drains. 

The plunger has been around for over 200 years, but it’s only recently become an integral part of the plumbing process in American homes.

To find out more about how the plunger is used in homes across America, we compiled a list of statistics. Here’s what we found:

– Americans use about 1.5 million plungers per year

– On average, each American household uses 3 plungers per year

But you may not know everything there is to know about this handy tool!

In this article, we’ll discuss how to use a plunger, when you should and shouldn’t use one, and what types are available. You’ll learn everything from the basics of using a plunger to advanced tips for how to use master plumber plunger.

What is a plunger?

A plunger is a device used to remove objects from a toilet drain, usually clogs. It’s made of rubber or plastic and has a hollowed-out end that you can place over the drain hole. When you push down on the plunger, it creates pressure against the water inside the toilet bowl and dislodges whatever is obstructing your plumbing.

7 Types of Plungers

Plungers are an important part of any home. They allow you to get the most out of your sinks and toilets and are also a great way to keep your drains free-flowing.

But there are seven different types of plungers, and each one is best suited for a specific job. Here’s what you need to know about each type:

Sink Plunger

The sink plunger is generally used for clearing out clogs in sinks, tubs, and showers. It has an open end that fits over the drain opening and a flat bottom that sits on top of the pipe below. This allows for maximum suction with minimal effort!

Toilet Plunger

The toilet plunger is designed specifically for clearing out clogs in toilet bowls. Unlike its sink counterpart, it has two parts: an open end that fits over the drain opening and a cup-shaped bottom section that allows you to plunge without getting dirty water all over yourself or your bathroom floor!

Accordion Plunger

The accordion plunger is a type of plunger that has been used for many years. It consists of a rubber cup that forms an accordion-like shape when compressed. When the plunger is pushed down into the drain, the rubber cup expands outwards to create a seal over the drain opening. When you remove the plunger from the drain opening, it will contract back into its original shape as air rushes back into the space between its folds. This action helps push out any water or other liquids trapped underneath it to clear any blockages within your plumbing system.

Taze Plunger

Taze plungers are made from silicone rubber and have a ribbed surface that is designed to clean out the hair, lint, and other debris from all types of drains. The ribs on this type of plunger help create more suction than accordion plungers, making them ideal for use on toilets with clogged pipes where there are no visible blockages, but water still won’t drain properly because of hair or other debris caught in the pipes below ground level.

Power Plunger

The Power Plunger is the most effective plunger for clogs. It uses water pressure to create suction, which loosens and removes clogs in drains. To use a power plunger, fill the cup with water and then plunge it down into the drain to clear it of any debris. This type of plunger is best for clearing clogs in bathtubs and toilets.

Shower Plunger

A shower plunger is similar to a regular plunger but has a flange at the end instead of a handle. To use a shower plunger, fill the plunger’s cup with water and then plunge it down into the drain to clear it of any debris. This type of plunger is best for clearing clogs in bathtubs and toilets.

Manual Drain Snake Plunger

A manual drain snake plunger, or drain auger, is a tool with a long, flexible metal coil or cable that is inserted into the drain. By twisting and pushing, it helps break up and remove clogs.

What would a plumber do with a plunger?

When you need to unclog your sink, toilet, or drain, the plunger is there for you. It’s a tool that has no moving parts and can be used by anyone. It’s also one of the most effective ways to unclog a drain.

But what does a plumber do with a plunger? Here are three things plumbers do with their plumber plungers:

Sink/Bathtub/Shower Clogs

If you’re having a clog in your sink, bathtub, or shower, a plunger is your best friend. It’s simple: just place the plunger over the drain and use it to plunge up and down on the water in order to break up the blockage.

Toilet Clogs

If you’ve got a toilet clog, try this trick: stick the plunger over the hole and push down firmly until you feel a suction effect begin to form (this may take some time). Once you’ve got a good seal going, pull up on the plunger handle to create pressure that will force out whatever was blocking your toilet.

Verification of Blockage Clearance

After using a plunger to clear a clog, a plumber may run water or flush the fixture to verify if the blockage has been successfully cleared. They would check for proper water flow and drainage to ensure the plumbing fixture was functioning correctly.

Can You Plunge Like a Plumber?

You’re probably using a plunger, but are you using it right?

If you want to know how to use a plunger like a PRO, then keep reading. We’re going to break down the basics of using a plunger so that the next time you need one, you’ll know exactly how to handle it.

Whether you’re trying to unclog your toilet or drain, there’s no such thing as too much information when it comes to plunging.

Choose the right plunger.

First things first: choose the right plunger for the job. If you have clogs in your sink, use an O-shaped plunger. For toilets, use one that looks like a bellows. And if you’ve got a tub full of water that won’t go down no matter what—a bathtub stopper or shower drain—then reach for an accordion-style plunger.

Create a good seal.

Second: create a good seal. Plungers can be tricky because they don’t have handles, so placing them at just the right angle is important to create the best seal with your drain lines. This will help you get all the air out and create suction, so you can plunge away until whatever is blocking your line goes down!

Use water.

Before plunging, add some water to the fixture. For sinks, bathtubs, and showers, fill the basin or tub with a few inches of water. In the case of toilets, make sure there’s enough water in the bowl to cover the cup of a plunger. The water helps create hydraulic pressure and aids in dislodging the clog.

Maintain a firm grip.

When you’re trying to get that toilet unclogged and using a plunger, it’s important to keep the plunger handle firmly in your hands so you can apply maximum pressure. If your hands are too slippery or your grip is too weak, you’ll end up splashing around in the toilet bowl or clogging up your drain with toilet paper. 

Use quick and forceful strokes.

Plungers work by creating suction and pressure in the toilet bowl, which will break up any clogs or blockages in the pipe. To do this, you’ll need to plunge quickly—but not so quickly that you lose control of the plunger! If you plunge too slowly, or if it takes several tries before anything happens, you might be creating more problems than you’re solving.

Be patient and persistent.

Sometimes clogs take longer than others to move out of the way. Don’t give up! If you’ve been at it for 10 minutes with no luck, try again later—you may find that after 30 minutes, your clog has cleared itself out completely!

Test the drain.

Once you are done with plunging, make sure to test the drain by running water or flushing the fixture. This helps confirm if the clog has been successfully cleared. In case the water flows without any problems, the clog is likely resolved.

Have a Toilet Clog, and Need Repair? Call Haynes Plumbing Services!

If you’re experiencing a toilet clog and need repair in Stafford, VA—don’t panic. Haynes Plumbing Services is here to help!

At Haynes Plumbing Services, we are committed to being the best plumbing company in Stafford, VA. Our team has been serving the local community for over 25 years, and we want to make sure that you get the quality service you deserve. 

We provide plumbing services for residential and commercial customers throughout Stafford and surrounding areas, including:

– Toilet/Sink/Drain clogs

– Toilet repair and installation

– Garbage disposal problems

– Water heater repair and installation

– Tankless water heater installation

– Burst pipe repair

– Repiping solution

– And many more…

With our vast experience and expertise, we can help you with any kind of plumbing issue—from clogged toilets to leaky faucets. Our trained professionals will arrive on time, assess your situation, fix it, and then leave no trace behind. We guarantee that you’ll be happy with our work!

Moreover, we believe in first-rate customer service from start to finish, so if you have any questions about your toilet repair or clog removal process, don’t hesitate to ask us! 

Call us at (540) 659-3295 when you have any plumbing needs, including Toilet and Faucet Repairs in Stafford!


    Google Rating
    Scroll to Top